Bolting Theory



    Function of Bolts and Nuts

    Threaded fasteners are used across industry to assemble products ranging from pipelines to heavy-duty earth movers and from cranes and bridges and many more. Their principle function is to create a clamping force across the joint which is able to sustain the operating conditions without loosening.

    Correctly tightened bolts make use of their elastic properties, to work well they must behave like springs. When load is applied, the bolt stretches and tries to return to its original length. This creates compressive force across the joint members.

    Behavior of Bolts and Nuts Elasticity is defined in Hooke’s Law of Physics: The stress in a bolt is directly proportional to its strain. The stress-strain of a bolt has an elastic range and a plastic range. In this elastic range Hooke’s Law is true.

    All of the elongation applied within the elastic range is relieved when the load is removed. The amount of elongation increases when more load is applied. When a bolt is stressed beyond its proof load (maximum load under which a bolt will behave in an elastic manner), the elastic elongation changes to plastic deformation and the strain will no longer be proportional to stress.

    In the plastic deformation a part of the elongation will remain after the load is removed. The point where this permanent elongation occurs is called the yield strength. The further application of load takes the bolt to a point where it begins to fail this is termed its ultimate tensile strength (UTS). At this UTS-point, if additional force is applied to the bolt it will continue to elongate until it finally breaks. The point at which the bolt breaks is called the tensile point.

    Careful attention must be paid to the grade of bolt being used as bolt grades differ in the elastic range.


    The main purpose of a bolt and nut is to clamp parts together with the correct force to prevent loosening in operation. The term preload refers to the loading in a bolt immediately after it has been tightened.

    The amount of preload (residual load) is critical as the joint can fail if the load in the bolt is too high, too low, or not uniform in every bolt.

    Uneven bolt loads can result in:

    • Some bolts being loose while others are overloaded.
    • Crushing of the gasket on one side, leakage on the other side.

    Preload is normally dictated by the joint design, (see Enerpac Bolted Joint Integrity) for information on common joint types or contact your local representative.

    Tightening Methods

    Principally there are two modes of tightening: “Uncontrolled” and “Controlled”.

    Uncontrolled Tightening

    Uses equipment and/or procedures that cannot be measured. Preload is applied to a bolt and nut assembly using a hammer and spanner or other types of impact tools.

    Controlled Tightening

    Employs calibrated and measurable equipment, follows prescribed procedures and is carried out by trained personnel. There are two main techniques: Torque tightening and Bolt Tensioning.

    1. Torque Tightening – Achieves preload in a bolt and nut assembly via the nut in a controlled manner using a tool.

    2. Bolt Tensioning – Achieves preload in a bolt and nut assembly by stretching the bolt axially using a tool.

    Advantages of Controlled Tightening

    Known, controllable and accurate bolt loads
    Employs tooling with controllable outputs and adopts calculation to determine the required tool settings.

    Uniformity of bolt loading
    Especially important on gasketed joints as an even and consistent compression is required for the gasket to be effective.

    Safe operation following prescribed procedures
    Eliminates the dangerous activities of manual uncontrolled tightening and requires that the operators be skilled and follow procedures.

    Reduces operational time resulting in increased productivity
    Reduces tightening time and operator fatigue by replacing manual effort with the use of controlled tooling.

    Reliable and repeatable results
    Using calibrated, tested equipment, following procedures and employing skilled operators achieves known results consistently.

    The right results first time
    Many of the uncertainties surrounding in-service joint failures are removed by ensuring the correct assembly and tightening of the joint are carried out the first time.

    Winnellie Group
    Based on 22 reviews
    powered by Google
    Jutta TilleryJutta Tillery
    14:34 02 Apr 22
    Excellent customer service, kept us updated throughout the delivery process really looking forward to doing business with Waltan Tools again soon
    Daniel and ScottDaniel and Scott
    12:02 29 Jun 21
    We have done business with Winnellie Hydraulics on numerous occasions and find them to always be nothing but professional, honest and reliable.Their customer service is excellent and they are always a pleasure to work with. We would highly recommend Winnellie Hydraulics and we look forward to continuing business with Max and the team in the up and coming future.
    Damien PedersenDamien Pedersen
    06:23 15 Feb 21
    Winnellie Hydraulics are up most professional and I am always impressed with the service offered and provided. The team at Winnellie Hydraulics are highly skilled, innovative and ever reliable. They continue to be the Territory’s leading service specialists within the fields of the hydraulic and pneumatic services and solutions. The team have a broad range of knowledge in hydraulic, pneumatic, hose management and products across a extensive range of divisions. The team at Winnellie Hydraulics are easy to work with and really appreciate their customers and strive for continuous business improvement.
    Rob NorthRob North
    07:53 10 Feb 21
    Efficient, professional and dedicated. The team at Winnellie Hydraulics are a pleasure to work with and are customer service specialists.Max and the team have taken on many challenges to assist with emergent scopes at our onshore facility in Darwin. They go above and beyond to meet the timeline required without missing a beat on quality.I highly recommend dealing with them and look forward to future business.Thanks guys
    Sonia HarveySonia Harvey
    05:25 08 Feb 21
    The team at Winnellie Hydraulics are customer service specialists! They certainly go above and beyond to meet the needs of customers and are a great local service and supply business. I highly recommend dealing with them.
    Darren SteeleDarren Steele
    02:59 07 Feb 21
    For all your Hydraulic & Pneumatic needs, Winnellie Hydraulics has you covered.Max and the team run a great operation that supports the Oil & Gas and Mining industries.With great brands supporting them, they are truly the one stop shop for all your engineering needs.
    Dipak NandDipak Nand
    23:06 04 Feb 21
    The team at Winnellie hydraulics, is great to work with, they understand our priority and service delivery to our Defence clients, No job too small or big and delivering of high quality products and service. Also really easy to deal with in regards to faults/ warranty and SME service . Highly recommended to use.
    Darren UptonDarren Upton
    22:54 04 Feb 21
    Winnellie Hydraulics are a Parker PPD for the NT which means they have full access to all Parkers Hannifin products & our local Engineering team in Australia who can work with Winnellie on any projects where clients needs are meet using Parkers products & their insulation experience
    Ben TilbrookBen Tilbrook
    07:35 04 Feb 21
    Outstanding commitment to their customers, in my experience there isn’t anything that is too hard for this mob. Always prepared to find solutions to their customers now matter how big or small the request. A great family business who take pride in providing product and service.
    Call Now Button